Piergiacomi

SF 30: Pliers for Ø mm 0.20÷0.64 fitted with elastic part that enables the stripping of the insulating sleeve of cables without damaging the conductor wires.

ESD-safe handles version available .

SFF 30: Fixed wire stripper for Ø mm 0.32÷0.51. Different cutting capacities to those shown are available.
 

ESD-safe handles version available.

PST 0.5-0.6-0.8-1.0: Pulling action strippers. Light weight, inexpensive and rapid to use, PST is available in 4 versions:

SF 40/1: SF-40-1 is a reliable tool easy to handle and very fast to use. Due to its singular flat shape and its lightness it can be easily carried in one’s pocket.
Wire stripper for diameters from 0.25mm to 1mm. (30-18 AWG). For use in electronics.
 

SF 40/2: SF-40-2 is a reliable tool easy to handle and very fast to use. Due to its singular flat shape and its lightness it can be easily be carried in one’s pocket.
Wire stripper for diameters from 1.3mm to 1.8mm. (16-13 AWG). For electro-technical work.
 

PCC1: Wire stripper for co-axial cables with double function as showned in picture:
1) insert the cable in the correct hole at the side, press and turn the tool 90° at the same time and pull.
2) insert the cable in the central hole, press and turn the tool 90° at the same time and pull.
 

PS 4÷10: Wire stripper with double function as shown in picture:
1) wire stripper for the external cover: insert the cable into one of the frontal holes, press, turn the tool 90° around and then pull back. From Ø 4 to 10 mm (AWG 6-000)
2) wire stripper for internal wires: insert one of the internal wires into one of the appropriate lateral holes, press and pull back. From Ø 0.8 to 2.6 mm (AWG 20-10)
 

PRF 0: Wire scraper pliers.

How to use it: Insert the wire between the 2 edges up to the point where one wishes to strip and then pull back the tool. If needed repeat this operation several times while turning the wire.