Reverse angle flush cutter. Terminal wire cut at 1.5 mm from the surface. Steel thickness 2.5 mm. Tool length 138 mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 25 15 D)

Reverse angle flush cutter. Terminal wire cut at 1.5 mm from the surface. Same characteristics as TR 2515, but designed with longer handles for reduced cutting effort. Steel thickness 2.5 mm. Tool length 160mm. Grip model L.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 25 15 L D)

Tool for a clean, flush cut. Specially designed for cutting component leads at 1 mm from the surface. Steel thickness 3 mm. Tool length 138 mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 30 10 D)

Tool for a clean, flush cut. Specially designed for cutting component leads at 1.5 mm from the surface. Steel thickness 3 mm. Tool length 138 mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 30 15 D)

60° angled oblique end cutter. Specially designed for cutting component leads at 1.5 mm from the surface. Steel thickness 3 mm. Tool length 144 mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 30 15 V D)

End cutter, ideal for hard-to-reach areas. It cuts the component lead at 1 mm from the surface. Steel thickness 5 mm. Tool length 147 mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 5000 10 D)

End cutter, ideal for hard-to-reach areas. It cuts the component lead at 1.3 mm from the surface. Steel thickness 5 mm. Tool length 147mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 5000 13 D)

End cutter, ideal for hard-to-reach areas. It cuts the component lead at 1.5 mm from the surface. Steel thickness 5 mm. Tool length 147mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 5000 15 D)

Flush end cutter, ideal for hard-to-reach areas. Adjustable standoff length (from 0 to 5mm). Steel thickness 5 mm. Total length 147 mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 5000 W D)

Tool for a clean and flush cut. Specially designed for cutting component leads at 1.5 mm from the surface. Steel thickness 5 mm. Tool length 138 mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 5015 D)

Tool for a clean and flush cut. Specially designed for cutting component leads at 2 mm from the surface. Steel thickness 5 mm. Tool length 138 mm. Grip model St.

Also available in the following version:
- with ESD-safe handles in grey/black (code TR 5020 D)