Kevlar cutter.
Ergonomic bi-material handles for a better grip. Anti-reflection and anti-oxidation surface treatment (phosphate coating). Closing stop lever. Steel thickness 3mm. Grip model S.

Adjustable single-holes fiber optic wire stripper (max 0.5mm).
Ergonomic bi-material handles for a better grip. Anti-reflection and anti-oxidation surface treatment (phosphate coating). Closing stop lever. Steel thickness 3mm. Grip model S.

Pre-calibrated single-holes fiber optic wire stripper (125µm).
Ergonomic bi-material handles for a better grip. Anti-reflection and anti-oxidation surface treatment (phosphate coating). Closing stop lever. Steel thickness 3mm. Grip model S.

Pre-calibrated 3-holes wire stripper to remove fiber optic coating in one tool.
1st hole: from 1.6 to 3mm (outer sheath)
2nd hole: from 600 to 900 micron (buffer)
3rd hole: from 250 micron (acrylate)
Ergonomic bi-material handles for a better grip. Anti-reflection and anti-oxidation surface treatment (phosphate coating). Closing stop lever. Steel thickness 3mm. Grip model S.

Pouch containing 2 fiber optic wire strippers:
- CS-KC: Kevlar cutter
- CSF-3: pre-calibrated 3-holes wire stripper to remove fiber optic coating with a single tool (1st hole: 1.6-3mm (outer sheath); 2nd hole: 600-900µm (buffer); 3rd hole: 250µm (acrylate).

Belt pouch also available EMPTY.

Cable stripper for Minibreakout. This cable stripper is used to create a longitudinal window cut on vertical FTTH cables. In this way the operator can access the fiber modules inside the cable.
- suitable for cables 6-8mm diameters
- interchangeable steel blades

Hardened steel. Ergonomic bi-material handles for a better grip. Closing stop lever.
Anti-reflection and anti-oxidation surface treatment (phosphate coating).

Available the spare kit for SC6/8 (order code SC6/8-K).

Spare kit for SC-6/8 cable stripper.
It composed of:
- no. 4 blades
- no. 1 pin Ø 1x25mm
- no. 1 hexagonal wrench.