Coaxial cable stripper with double function, as shown in the figure:
1) insert the cable in the correct hole at the side, press and turn the tool 90° at the same time and pull.
2) insert the cable in the central hole, press and turn the tool 90° at the same time and pull.
AVAILABLE WHILE STOCKS LAST.

Wire stripper.
How to use it: Insert the wire between the 2 jaws up to the point where one wishes to strip and then pull back the tool. If needed, repeat this operation several times while turning the wire.
AVAILABLE WHILE STOCKS LAST.

Wire stripper with double function, as shown in the figure:
1) Wire stripper for the outer sheath (from Ø 4 to 10mm - 6-000 awg): insert the cable into one of the frontal holes, press and turn the tool 90° and then pull back.
2) Wire stripper for the internal wires (from Ø 0.8 to 2.6mm - 20-10 awg): insert one of the internal wires into one of the appropriate side holes, press and pull back.
AVAILABLE WHILE STOCKS LAST.