|
2000-S (1000 HOLES VERSION)Datasheet2000-S (1000 HOLES VERSION)
|
|
The 2000S 1000 holes version is a pneumatic machine for cutting (standard height 3mm) and forming of untaped electronic component terminals.
The machine is supplied standard with only the cutting area, and thanks to the additional mask (height 1.5mm) a total cutting height of 4.5mm is reached.
As optional, there are different models of forming masks suitable for your needs (see standard forming mask).
This version has multi-holes area (1000 holes), dedicated holes & slots.
Cutting capacity: Ø 0.3-1mm (copper or soft wires)
Pitch: 2.54mm
Hole diameter: 1.2mm
Eyelet width: 1.0mm
Standard cutting height: 3mm
Cutting capacity components: 1000-1500 pcs/h
Supply pressure: 6 bars
Consumption: 1.5 Nl/min
Weight: 2.8 Kg
Dimensions: 170(d)x90(w)x78mm(h)
Activated by pedal.
|
|
|
2000-SE (1000 HOLES VERSION)Datasheet2000-SE (1000 HOLES VERSION)
|
|
The 2000SE 1000 holes version is an electric machine for cutting (standard height 3mm) and forming of untaped electronic component terminals.
The machine is supplied standard with only the cutting area, and thanks to the additional mask (height 1.5mm) a total cutting height of 4.5mm is reached.
As optional, there are different models of forming masks suitable for your needs (see standard forming mask).
This version has only dedicated standard cutting areas & slots.
Cutting capacity: Ø 0.3-1mm (copper or soft wires)
Pitch: 2.54mm
Hole diameter: 1.2mm
Eyelet width: 1.0mm
Standard cutting height: 3mm
Cutting capacity components: 1300-1800 pcs/h
Power supply requirements: 230V 50Hz
Maximum power consumption: 80 W
Weight: 8 Kg
Dimensions: 310(d)x210(w)x120mm(h)
This system is supplied with an IP 220V plug - GP 220V/240V plug adapter.
Activated by pedal.
|
|
|
2000-SE (STANDARD VERSION)Datasheet2000-SE (STANDARD VERSION)
|
|
The 2000SE STANDARD version is an electric machine for cutting (standard height 3mm) and forming of untaped electronic component terminals.
The machine is supplied standard with only the cutting area, and thanks to the additional mask (height 1.5mm) a total cutting height of 4.5mm is reached.
As optional, there are different models of forming masks suitable for your needs (see standard forming mask).
This version has only dedicated standard cutting areas & slots.
Cutting capacity: Ø 0.3-1mm (copper or soft wires)
Pitch, 3 dedicated cutting area:
• 3 pins 2.54x1.27mm
• 3 pins 3.81x2.54mm
• 5 pins 5.08x5.08mm
Hole diameter: 1.2mm
Eyelet width: 1.0mm
Standard cutting height: 3mm
Cutting capacity components: 1300-1800 pcs/h
Power supply requirements: 230V 50Hz
Maximum power consumption: 80 W
Weight: 8 Kg
Dimensions: 310(d)x210(w)x120mm(h)
This system is supplied with an IP 220V plug - GP 220V/240V plug adapter.
Activated by pedal.
|
|
|
2000-S (STANDARD VERSION)Datasheet2000-S (STANDARD VERSION)
|
|
The 2000S STANDARD version is a pneumatic machine for cutting (standard height 3mm) and forming of untaped electronic component terminals.
The machine is supplied standard with only the cutting area, and thanks to the additional mask (height 1.5mm) a total cutting height of 4.5mm is reached.
As optional, there are different models of forming masks suitable for your needs (see standard forming masks).
This version has only dedicated standard cutting areas & slots.
Cutting capacity: Ø 0.3-1mm (copper or soft wires)
Pitch, 3 dedicated cutting area:
• 3 pins 2.54x1.27mm
• 3 pins 3.81x2.54mm
• 5 pins 5.08x5.08mm
Hole diameter: 1.2mm
Eyelet width: 1.0mm
Standard cutting height: 3mm
Cutting capacity components: 1000-1500 pcs/h
Supply pressure: 6 bars
Consumption: 1.5 Nl/min
Weight: 2.8 Kg
Dimensions: 170(d)x90(w)x78mm(h)
Activated by pedal.
|
|
