The SMA-10L is a machine specifically designed to separate pre-scored printed circuit boards, equipped with 2 blades. For FR4 or CEM. Thanks to its unique design, SMA-10L can operate with both short and long boards, and populated. In this last case, the maximum component height is 32 mm.
The alignment system allows three degrees of adjustment: the first adjustment is the height of the workbench in relation to the cutting tool and can be made using the special knob. The second adjustment is made using a guide that allows to easily align the scoring on the blade. The guide can be easily adjusted to compensate for different scoring depths. The third adjustment is a mechanical reference, placed on the back and lockable with 2 knobs, which guarantees the correct positioning of the panel.
TECHNICAL FEATURES:
– Diameter of the 2 blades: 125 mm
– PCB thickness: from 0.8 to 1.6 mm
– Max length: 600 mm
– Max PCB dimension: 1000 mm (with extensions)
– Max PCB dimension: 600 mm (without extensions)
– Manual Z control (blade adjustment): 10 mm
– Workbench height adjustment: 10 mm (manual)
– Power supply: 230 V
– Power: less than 100 W
– Dimensions: 750x550x350(H) mm
– Working area: 750×1200 mm
– Weight: 47 Kg
CE marked
ON REQUEST: workbench extensions
